Keep Your Bagging Scale Operating at Peak Performance

Net Weigh Scales

Your bagging scale is your company’s profit center. Accurately measuring your products, reducing product giveaway and keeping the bagging scale running smoothly directly impacts your bottom line. Some tips to help you maximize scale performance:

Keep it Clean

Model 600NW/200NW net weigh scales have easy lift-off sides for fast, tool-less access.  Put the scale in clean out mode with weigh bucket doors open. Using a compressed air gun, blow off any accumulated materials on the weigh bucket, weigh frame and in the gravity feed or belt feed sections. Do this at shift start and shift end to keep material from building up. Use a putty knife to remove built-up materials.

Run the Scale Empty

You’d be surprised how many companies end their shift and leave a scale and scale hopper full of material. Run both empty to keep materiel from building up.

Calibrate

Calibrate the system with certified test weights at least twice a year.

Bearings

Grease bearings to keep them operating smoothly. You should also monitor gaskets and seals, replacing those that are worn.

Pneumatics

Review pneumatics annually. Replace or rebuild worn air cylinders or values. (Hamer-Fischbein Service Kits are designed specifically for your machine.)

Flow

Make sure flow controls are properly set. Adjust feed gate (on gravity feed design) to meet material flow requirements to maximize accuracy. Different bulk density materials flow differently. Be sure your operators know how to adjust feed gates to maximize fill accuracy.

These simple actions help you get the most out of your scale investment, and watch your company’s bottom line profitability.

For more preventive maintenance tips and information on maintaining and servicing your bagging equipment, contact Technical Service at: service@hamer-fischbein.com.

  •